贺兰山西麓中生代构造反转及意义

通过对小松山断裂特征的再分析和对顺层断层特征的观察研究发现,发育于贺兰山北段西麓的小松山“推覆”构造实际上是一个滑覆构造。该区于晚侏罗世之后发生大规模构造反转,贺兰山沉积特征及玄武岩环境指示该区是一大陆裂谷斜坡,在中生代早中期并不存在大规模的东西向挤压应力环境。滑覆面之下的三叠系—中上侏罗统的褶皱变形及顺层剪切是这种滑覆引起的局部构造变形,与鄂尔多斯地块西部发育的典型的东西向逆冲形成明显对比,值得重视。      

半合成发动机油基础油调配的仿真研究

采用矿物油、聚α-烯烃、多元醇酯和高压加氢BS光亮油调配半合成发动机油基础油,并测定不同配比下基础油的油膜强度、摩擦系数和粘度指数,通过双隐层BP神经网络对基础油调配进行仿真研究,建立了半合成发动机油基础油调配配方优化模型,经过优化训练后,最终得出综合性能优良的配方组合。按49.9957∶4.3693∶42.4578∶3.1772的配比调配基础油,可以使基础油的油膜强度、摩擦系数和粘度指数分别达到56 kg,0.065和112,经实验后仿真结果与实验结果(56 kg;0.065598;112)极其吻合。     

塔里木盆地雅—轮地区断层封堵性研究

塔里木盆地雅—轮地区大部分圈闭及油气藏的形成与断裂作用密切相关,对断层封堵性的综合研究已成为该地区油气勘探的重要因素。应用地质定性分析、Allen剖面分析及断层涂抹量计算等方法,通过对研究区4个典型断层封堵油气藏的系统解剖研究,建立雅—轮地区断裂封堵性评价标准,对雅—轮地区断层的封堵性进行综合评价。雅—轮地区断层整体封堵效果良好,断层在圈闭形成和油气聚集过程中起着重要的控制作用,形成一系列沿断层带状分布的油气藏。亚南断裂的封堵效果东部要优于西部,下部要优于上部。轮台断裂在不同部位、不同深度均存在着不同的封堵性能,封堵非均质性明显,总体显示断裂东部地区(也根附近)的封堵性要好于西部雅南地区。      

The Application of the Theory of the Price Elasticity of Demand to the EMS Management

1　Introduction　ExpressMailService (EMS )wasopenedupbyChinaPostintheearly 80stomeettheneedsofeco nomicdevelopment.It sthemostcompetitiveoneofthepostservices.There recivilaviation ,Chinarail wayandotherprivateexpressdeliverycompaniesdomesticallyandUPS ,TNT ,DHLandTEDEXcompetingwithEMSintheinternationalmarket.OneofthemostpowerfulcompeteweaponofthesecompaniesisthelowerpricethanEMS[1 ] .BecauseofthefiercecompetitionEMSdeclinedfromthemo nopolistindomesticandinternationalmarketoftheear…     

Numerical Study of Finite Element Method Based Solutions for Propagation of Wetting Fronts in Unsaturated Soil

The accurate prediction of the propagation of a wetting front in an unsaturated soil subjected to surficial infiltration is of practical importance to many geotechnical and geoenvironmental problems. The finite element method is the most common solution technique as the hydraulic soil properties are highly nonlinear. Two important issues are often found to create difficulties in such analyses. First, numerical oscillations are usually observed in the calculated pore pressures at the wetting front. Second, when a reasonable mesh size and time step are used, the elevation of the wetting front may be seriously overpredicted. This paper is focused on the second issue. The under-relaxation (UR) technique used in the iterative process within each time step is found to have a serious impact on rate of convergence with refinement in mesh size and time step. Two different techniques are typically used; the first evaluates the hydraulic conductivity using an average of heads calculated from the preceding time node and the most recent iteration of the current time node (UR1), and the second evaluates the hydraulic conductivity using the average of heads calculated from the two most recent iterations of the current time nodes (UR2). The study shows that UR1, which is adopted in programs such as SEEP/W, ensures that the solution converges rapidly to a stable solution within a time step, but may converge to the wrong wetting front at a given elapsed time unless a sufficiently refined mesh is used. UR2 converges much more slowly within a time step, but the error in the wetting front is smaller than that generated by UR1.     

Study on the Complexity of the Bullwhip Effect

Recent years have witnessed a rapid growth of interest in the study of the dynamic behavior of replenishment rules of bullwhip effect. We prove that bullwhip effect and butterfly effect share a same the self-oscillation amplifying mechanism that is the ordering decisions the supplier self-oscillation amplify the perturbations brought by the errors in the processing of retailers' demand information. This results as an explicit self-similar structure of the sensitivity of the system to the initial values duty to the nonlinear mechanism. In this paper, the causes process of the bullwhip effect is described as the internal nonlinear mechanism and study on the complexity of bullwhip effect for order-up-to policy under demand signal processing. The methodology is based on fractal and chaotic theory and allows important insights to be gained about the complexity behavior of bullwhip effect.     

关于通信导航设备电源防雷的探讨

根据通信导航设备在雷击中的损坏现象，提出了电源防雷措施，即实施分级保护，在多雷区配置防雷变压器。简单介绍了级间配合，抑制横向过电压的产生，以及接地阻抗的简单计算和正确选用等，以达到对电源系统的有效防雷保护。     

多传感器目标的模糊识别

根据模糊理论，采用信息融合技术和模糊识别技术，讨论了在多类传感器网内进行多目标模糊识别的一般原理和方法。     

600 A IGBT开关电路及其散热系统设计

采用IGBT开关电路，对大功率电阻带进行直流脉宽调制控制，实现了内燃机车大功率直流发电机负载实验中的负载大小的连续调节。为了避免在实验过程中IGBT器件的温度过高，采用独特的双管IGBT结构和双向强迫风冷的散热系统。实验表明该电路运行稳定、可靠。     

饼干炉湿度控制的改进方法

在大空间的温度控制系统中 ,采用简单的PID控制规律 ,对空间的温度、湿度进行解藕计算 ,将空间的相对湿度控制转化为送风含湿量的控制。该控制方式稳定、可靠 ,并且节约能源。本方法适用于所有的烘烤炉中